Specify End Cut (EC) or Drill point (DP) after part number when
| TOOL NO. | DIAMETER | L.O.C. |
| CR-1 | 1/8 | 1/2 |
| CR-1-DP | 1/8 | 1/2 |
| CR-1-EC | 1/8 | 1/2 |
| CR-2 | 3/16 | 5/8 |
| CR-2-DP | 3/16 | 5/8 |
| CR-2-EC | 3/16 | 5/8 |
| CR-3 | 1/4 | 3/4 |
| CR-3-DP | 1/4 | 3/4 |
| CR-3-EC | 1/4 | 3/4 |
| CR-4 | 3/8 | 1 |
| CR-4-DP | 3/8 | 1 |
| CR-4-EC | 3/8 | 1 |
| CR-5 | 1/2 | 1 |
| CR-5-DP | 1/2 | 1 |
| CR-5-EC | 1/2 | 1 |