TCM-Series

This series of Mills are designed to cover the various sizes of pipe. The inside member produces a chamfer at 30° and the outside member 45°. A liberal forward or backward adjustment accomodates different wall thicknesses. The cutting teeth are so developed as to preclude chatter and provide ample chip room.

Operating Speeds – Moderate speeds of about 100 R.P.M. to about 200 R.P.M. are recommended for these cutters. Start at a slower speed and increase until best results are obtained.

Cutting Teeth – Are designed to give a shearing cut. They curl the fine chips away from the cutter to avoid loading.

The Ring – Or outside member is adjustable for more or less relative chamfer on the outside edge, and is secured after adjustment by socket set screws. the inside member produces a chamfer of 30° angle with C/L and the outside member 45°. Operating speeds range from 50 to 200 R.P.M. depending on the size of cutter, material and work condition.

TOOL  NO. PIPE SIZE. TUBE O.D. PLUG DIA THREAD SIZE
 T-6 3/16 .156 1/4
 T-8 1/4 .228 1/4
 T-10 5/16 .290 5/16
 T-12 1/8 3/8 .353 3/8
 T-14 7/16 .406 3/8
 T-16 1/4 1/2 .469 3/8
 T-18 9/16 .531 1/2
 T-20 3/8 5/8 .595 1/2
 T-24 1/2 3/4 .722 1/2
 T-28 7/8 .847 1/2
 T-32 3/4 1 .965 1/2

Threaded for insertable shank

TOOL  NO. PIPE SIZE. TUBE O.D. PLUG DIA THREAD SIZE
 T-36 1-1/8 1.090 1/2-20
 T-40 1 1-1/4 1.215 5/8-18
 T-42 1-5/16 1.280 5/8-18
 T-44 1-3/8 1.340 5/8-18
 T-48 1-1/2 1.465 3/4-16
 T-52 1-1/4 1-5/8 1.590 3/4-16
 T-56 1-1/2 1-3/4 1.715 3/4-16
 T-60 1-7/8 1.840 3/4-16
 T-64 2 1.965 1-14
 T-72 2 2-1/4 2.192 1-14
 T-76 2-3/8 2.310 1-14
 T-80 2-1/2 2.435 1-14